Wednesday, July 17, 2019

Installation FreeRADIUS and Daloradius on CentOS 7 and RHEL 7

SELINUX Setting:-

Before installations, I recommend turning off SELinux or setting it in permissive mode:-
[root@radius ~]# setenforce 0
[root@radius ~]# sed -i 's/^SELINUX=.*/SELINUX=permissive/g' /etc/selinux/config
[root@radius ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
[root@radius ~]#


Update your CentOS 7 and install Deployment Tool. You can run this commands to update your CentOS and for Deployment Tool installation.
[root@radius ~]# yum -y update
[root@radius ~]# yum groupinstall "Development Tools" -y

Install httpd server

[root@radius ~]# yum -y install httpd httpd-devel
Once installation competed you can enable and start your HTTPD service using below commands. You can also check running status of HTTPD service using below commands. As like below screen shot.
[root@radius ~]# systemctl enable httpd
[root@radius ~]# systemctl start httpd
[root@radius ~]# systemctl status httpd

Installing and Configuring MariaDB

Now we are going to install and configure MariaDB 10.1.33, using below steps:-

Add MariaDB official repo content to CentOS 7 system

Add the below content in MariaDB.repo file and save the file.
[root@radius ~]#vi /etc/yum.repos.d/MariaDB.repo
name = MariaDB
baseurl =

Update system and install MariaDB to configure Database server

[root@radius ~]# yum -y update
[root@radius ~]# yum install -y mariadb-server mariadb
You will get prompted to install MariaDB GPG Signing key. Just press to allow installation.

Start and enable MariaDB

[root@radius ~]# systemctl start mariadb
[root@radius ~]# systemctl enable mariadb

Check running and enabled status of MariaDB

[root@radius ~]# systemctl status mariadb
[root@radius ~]# systemctl is-enabled mariadb.service

Configure initial MariaDB settings to secure it.

Here we will set root password. For security purposes, consider removing anonymous users and disallowing remote root login. You can see below example configuration. Key choices has been marked in bold.
[root@radius ~]# mysql_secure_installation
In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none):
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
... Success!
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] y
... Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] y
... Success!
By default, MariaDB comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] y
- Dropping test database...
... Success!
- Removing privileges on test database...
... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!
[root@radius ~]#

Allow only local connection to mysql server. This is a security mechanism.

[root@radius ~]# vi /etc/my.cnf

Configure Database for freeradius

[root@radius ~]# mysql -u root -p -e " CREATE DATABASE radius"
[root@radius ~]# mysql -u root -p -e "show databases"
[root@radius ~]# mysql -u root -p
MariaDB [(none)]> GRANT ALL ON radius.* TO radius@localhost IDENTIFIED BY "radiuspassword";
MariaDB [(none)]> \q
[root@radius ~]#

Installing php 7 on CentOS 7

[root@radius ~]# cd ~
[root@radius ~]# curl '' -o
[root@radius ~]# bash
[root@radius ~]# yum remove php-cli mod_php php-common
[root@radius ~]# yum -y install mod_php70u php70u-cli php70u-mysqlnd php70u-devel php70u-gd php70u-mcrypt php70u-mbstring php70u-xml php70u-pear
[root@radius ~]# apachectl restart
After installation you can check php version to confirm using below commands:-
[root@radius ~]# php -v
If php 7 fails to work for you, then you can install php 5 by running below commands. You have to first uninstall php 7 then you can try with php 5.
[root@radius ~]# yum -y install php-pear php-devel php-mysql php-common php-gd php-mbstring php-mcrypt php php-xml

Installing FreeRADIUS

[root@radius ~]# yum -y install freeradius freeradius-utils freeradius-mysql
You have to start and enable freeradius with below commands, after successfully installation.
[root@radius ~]# systemctl start radiusd.service
[root@radius ~]# systemctl enable radiusd.service
Created symlink from /etc/systemd/system/ to /usr/lib/systemd/system/radiusd.service.
Now you can check the status:-
[root@radius ~]# systemctl status radiusd.service
Now we have to configure firewalld to allow radius and httpd packets in and out.
Radius server use udp ports 1812 and 1813. This can be confirmed by viewing the contents of the file /usr/lib/firewalld/services/radius.xml. You can cat this file and see.
[root@radius ~]# cat /usr/lib/firewalld/services/radius.xml

First start and enable firewalld for security

[root@radius ~]# systemctl enable firewalld
[root@radius ~]# systemctl start firewalld
[root@radius ~]# systemctl status firewalld

Confirm firewalld is running or not

[root@radius ~]# firewall-cmd --state

Add permanent rules to default zone to allow http,https and radius services

[root@radius ~]# firewall-cmd --get-services | egrep 'http|https|radius'
[root@radius ~]# firewall-cmd --add-service={http,https,radius} --permanent

Reload firewalld for changes to take effect

[root@radius ~]# firewall-cmd --reload

We can confirm that services were successfully added to default zone

[root@radius ~]# firewall-cmd --get-default-zone
[root@radius ~]# firewall-cmd --list-services --zone=public
dhcpv6-client http https radius ssh
You can see the three services present hence we are good to proceed.
[root@radius ~]# ss -tunlp | grep radiusd
If you want to run radius server in debug mode. You can run this command radiusd -X If debug mode is going to fail to bind to ports, you may have to kill radius server daemon first. You will get this types of massage if your radius server will fail to bind the port.
In this case you have to kill radius daemon first then you can start radiusd -X
[root@radius ~]# pkill radius
Then you can start radius server in debugging mode and you will see below massage if your radius service successfully run in debug mode.
[root@radius ~]# radiusd –X
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address port 18120 bound to server inner-tunnel
Listening on proxy address * port 39556
Listening on proxy address :: port 52609
Ready to process requests

Configure FreeRADIUS

To Configure FreeRADIUS to use MariaDB, you can follow steps below:-

Import the Radius database scheme to populate radius database

[root@radius ~]# mysql -u root -p radius < /etc/raddb/mods-config/sql/main/mysql/schema.sql

Configure Radius at this point

First of all we have to create a soft link for SQL under /etc/raddb/mods-enabled
[root@radius ~]# ln -s /etc/raddb/mods-available/sql /etc/raddb/mods-enabled/
Then we can configure SQL module /raddb/mods-available/sql and change the database connection parameters to suitable our environment like this:-
sql section should be look similar to below.
[root@radius ~]# vi /etc/raddb/mods-available/sql
sql {
driver = "rlm_sql_mysql"
dialect = "mysql"
# Connection info:
server = "localhost"
port = 3306
 login = "radius"
 password = "radiuspassword"
# Database table configuration for everything except Oracle
radius_db = "radius"
# Set to ‘yes’ to read radius clients from the database (‘nas’ table)
# Clients will ONLY be read on server startup.
read_clients = yes
# Table to keep radius client info
client_table = “nas”
Then change group right of /etc/raddb/mods-enabled/sql to radiusd:-
[root@radius ~]# chgrp -h radiusd /etc/raddb/mods-enabled/sql

Installing and Configuring Daloradius

Installing Daloradius

We can use Daloradius to manage our radius server. This is optional and should not be done before install FreeRADIUS. There are two ways to download daloradius, either from github or sourceforge.

Github method:-

[root@radius ~]# wget
[root@radius ~]# unzip
[root@radius ~]# mv daloradius-master/ daloradius

Sourceforge way:-

[root@radius ~]# wget
[root@radius ~]# tar zxvf daloradius-0.9-9.tar.gz
[root@radius ~]# mv daloradius-0.9-9 daloradius

Change directory for configuration

[root@radius ~]# cd daloradius

Configuring daloradius

Now import Daloradius mysql tables

[root@radius ~]# mysql -u root -p radius < contrib/db/fr2-mysql-daloradius-and-freeradius.sql
[root@radius ~]# mysql -u root -p radius < contrib/db/mysql-daloradius.sql

Configure daloRADIUS database connection details

[root@radius ~]# cd ..
[root@radius ~]# mv daloradius /var/www/html/
We need to change permissions for http folder and set the right permissions for daloradius configuration file.
[root@radius ~]# chown -R apache:apache /var/www/html/daloradius/
[root@radius ~]# chmod 664 /var/www/html/daloradius/library/daloradius.conf.php
Now we have to modify daloradius.conf.php file to adjust the MySQL database information . So let’s open the daloradius.conf.php and add the database username, password and db name.
[root@radius ~]# vi /var/www/html/daloradius/library/daloradius.conf.php
Especially relevant variables to configure are:
Make sure everything works, restart radiusd, httpd and mysql:
[root@radius ~]# systemctl restart radiusd.service
[root@radius ~]# systemctl restart mariadb.service
[root@radius ~]# systemctl restart httpd
If you have install php 7 then you can ignore php-pear installation. And you have to only run pear install DB.
[root@radius ~]# yum install php-pear
[root@radius ~]# pear install DB
We have completed installation and configuration of daloradius and freeradius. To access daloradius, open the link using your IP address, then you will get your radius dashboard.
Default login details are:
Username: administrator
Password: radius

In this tutorial we have seen how to install FreeRADIUS and DaloRADIUS. If you getting any issue in this steps, let us know. My pleasure to help you. 

Monday, July 15, 2019

How to install python on centos 7

Install Python 3.6.4 on CentOS 7 From a Repository

This is the easier method of the two for installing Python on your machine. Here, we simply add a repository that has the pre-compiled version ready for us to install. In this case, we are adding the Inline with Upstream Stable repository, a community project whose goal is to bring new versions of software to RHEL-based systems.

Step 1: Open a Terminal and add the repository to your Yum install.

sudo yum install -y

Step 2: Update Yum to finish adding the repository.

sudo yum update

Step 3: Download and install Python.

This will not only install Python – but it will also install pip to help you with installing add-ons.
sudo yum install -y python36u python36u-libs python36u-devel python36u-pip
Once these commands are executed, simply check if the correct version of Python has been installed by executing the following command:
python3.6 -V
You have now finished installing Python 3.6.4 on your CentOS 7 machine, as well as installing a native Python package management tool called pip.

Method 2: Compiling Python 3.6.4 on CentOS 7 From Source Code

installing python 3.6.4 on CentOS 7This is the more complicated method of the two, and will take more time – however, this method gives you more control over what gets installed and what doesn’t. It can also be more secure at times, depending on where the software package is downloaded from.
Important: Keep in mind that your Yum package manager will not know that you have installed Python 3.6.4 (or any other software) if you install software by manually compiling the source code. This means that no updates will be available for your manually installed software.

Step 1: Install the development tools needed for compilation.

First, we will need the tools in order to be able to compile and install programs from their source code. To do this, we will install the group “Development Tools” through Yum itself:
sudo yum groupinstall -y "Development Tools"
Once this is done, move on to step 2.

Step 2: Download the Python source files.

First, we need to create a directory in which our install will take place. Make a directory with a name of your choosing, then enter the directory. Once you are in your new directory, enter the following command to download the compressed Python source file.
Once the file is finished downloading, uncompress the file by using tar, then enter into the new directory that was just created:
tar -xJf Python-3.6.4.tar.xz
cd Python-3.6.4

Step 3: Run the configuration script.

Use the following command to have the installation software check your system before actually starting the installation process.
This command ensures that the install will work, along with creating a special ‘makefile’ that is unique to your system. This makefile is what you will use to install Python onto your system.

Step 4: Install Python.

Now we can finally execute the makefile. Run the following command to install Python onto your system. Note: This will take a few minutes. The speed of the compilation and install will depend on the speed of your processor.
First, we run the ‘make’ command which compiles the program.
Then, once that is finished, we can run the installation command.
make install
Once this command finishes, you will have installed Python successfully, along with pip and setuptools. From here, creating a virtual environment is easy, and coding and executing the latest Python code is now possible.

MySQL Backup and Restore Commands for Database Administration

How to Backup a Single MySQL Database?

To take a backup of single database, use the command as follows. The command will dump database [rsyslog] structure with data on to a single dump file called rsyslog.sql.
# mysqldump -u root -ptecmint rsyslog > rsyslog.sql

How to Backup Multiple MySQL Databases?

If you want to take backup of multiple databases, run the following command. The following example command takes a backup of databases [rsyslogsyslog] structure and data in to a single file called rsyslog_syslog.sql.
# mysqldump -u root -ptecmint --databases rsyslog syslog > rsyslog_syslog.sql

How to Backup All MySQL Databases?

If you want to take backup of all databases, then use the following command with option –all-database. The following command takes the backup of all databases with their structure and data into a file called all-databases.sql.
# mysqldump -u root -ptecmint --all-databases > all-databases.sql

How to Backup MySQL Database Structure Only?

If you only want the backup of database structure without data, then use the option –no-data in the command. The below command exports database [rsyslogStructure into a file rsyslog_structure.sql.
# mysqldump -u root -ptecmint -–no-data rsyslog > rsyslog_structure.sql

How to Backup MySQL Database Data Only?

To backup database Data only without structure, then use the option –no-create-info with the command. This command takes the database [rsyslogData  into a file rsyslog_data.sql.
# mysqldump -u root -ptecmint --no-create-db --no-create-info rsyslog > rsyslog_data.sql

How to Backup Single Table of Database?

With the below command you can take backup of single table or certain tables of your database. For example, the following command only take backup of wp_posts table from the database wordpress.
# mysqldump -u root -ptecmint wordpress wp_posts > wordpress_posts.sql

How to Backup Multiple Tables of Database?

If you want to take backup of multiple or certain tables from the database, then separate each table with space.
# mysqldump -u root -ptecmint wordpress wp_posts wp_comments > wordpress_posts_comments.sql

How to Backup Remote MySQL Database

The below command takes the backup of remote server [] database [gallery] into a local server.
# mysqldump -h -u root -ptecmint gallery > gallery.sql

How to Restore MySQL Database?

In the above tutorial we have seen the how to take the backup of databases, tables, structures and data only, now we will see how to restore them using following format.
# # mysql -u [username] –p[password] [database_name] < [dump_file.sql]

How to Restore Single MySQL Database

To restore a database, you must create an empty database on the target machine and restore the database using msyql command. For example the following command will restore the rsyslog.sql file to the rsyslogdatabase.
# mysql -u root -ptecmint rsyslog < rsyslog.sql
If you want to restore a database that already exist on targeted machine, then you will need to use the mysqlimport command.
# mysqlimport -u root -ptecmint rsyslog < rsyslog.sql

Sunday, July 14, 2019

Solving the "Control D" error...Linux

Control D Error:-

Repair the file system By Using fsck command 

fsck /dev/sdb

Steps to Rectify it:-....

1) Enter the bootable Cd/DvD of Rhel.
(The version you are using)

2) Read the control D error carefully.

3) Give the root password.

4) You will go to single usermod.

5) Try to access /etc/fstab file.

6) Will not allow you as will be in read only mode.

7) Enter this command:-
mount -o remount,rw /
(Will give read/write permission to /)

8) Will give u read/write permission to all
the files in /

9)Then again enter into /etc/fstab & rectify ur error.(vim /etc/fstab)

10)Give command reboot or init 5(As per ur wish)

Rectify it & Enjoy the Control D Error.....

TicTic v2.2 - Android media app for creating and sharing short videos

Facebook Twitter Tiktik – Android app for creating and sharing short videos. The customizable social video application to build ...

Popular Posts